A Silent Alternative to Traditional Film Generators

Noise and power instability are the silent killers of a high-end production. Standard film generators force crews to isolate sound with hundreds of feet of cabling, risking signal drop-offs and complicating logistics.

WEGREEN provides the ultimate portable power for filmmaking on location. Our flicker-free, pure sine wave architecture operates under 45dB, delivering the precise, stable energy required for sensitive LED panels and high-speed cameras without the sonic interference or voltage fluctuations of a combustion engine.

Engineered for the Precision of the Spotlight

  • Flicker-Free Pure Sine Wave

    Delivers ultra-stable voltage for sensitive ARRI/RED sensors. Ensures high-speed LED lighting remains steady at any frame rate. Zero-hum output for professional audio and PA systems.

  • High-Inrush Support (HMI Ready)

    Effortlessly handles the massive starting inductive loads of heavy-duty HMI lights and subwoofers that typically trip standard 2000W units.

  • Studio-Grade Silence (<45dB)

    Operates at near-silent levels (as low as 35dB), essential for sound-sensitive night shoots in residential areas and clear communication on-set.

  • IP66 Tactical Build

    Rugged protection ensures mission-readiness in the dust of a summer festival or the rain of an outdoor location shoot.

Choose Your Studio-Grade Power Module

Production Stability: A Silent Alternative to Film Generators

Production Gear Watts BP360G (2.24kWh) BP360C (3.07kWh) BP500A (5.12kWh)
Smoke Machine 1200W ~ 1.6 Hours ~ 2.2 Hours ~ 3.6 Hours
COB Light 300W ~ 6.3 Hours ~ 8.7 Hours ~ 14.5 Hours
LED Panel Light 150W ~ 12.7 Hours ~ 17.4 Hours ~ 29.0 Hours
Film Camera Group 150W ~ 12.7 Hours ~ 17.4 Hours ~ 29.0 Hours
Camera Monitor 100W ~ 19.0 Hours ~ 26.1 Hours ~ 43.5 Hours

On-Set Power & Production FAQ

Q: Does an ARRI ALEXA draw a lot of power, and will it run off 12V?

A: Professional cameras like the ALEXA 35 or Mini are power-hungry and sensitive to voltage drops. WEGREEN provides a pure sine wave 100% flicker-free output that supports high-draw HMI lights and camera rigs, ensuring no interference or damage to expensive 24V or 12V systems.

Q: What is the quietest power supply for film production on location?

A: Lithium systems are the silent gold standard. WEGREEN operates at under 45dB, meaning you can place the power source directly on the set next to the microphones, eliminating the need for 100ft extension cords and the voltage drop issues associated with them.

Q: Can I run high-wattage HMI lights like the ARRI M18 off-grid?

A: Yes. An ARRI M18 draws approximately 1800W. WEGREEN 3000W continuous output handles this with ease, while the 27kW surge manages the initial strike of the ballast without flickering or protection-trips.

Q: Is the system dual-voltage for international film productions?

A: We offer models specifically configured for 100V/120V and 230V/240V. The pure sine wave output ensures that sensitive digital cinema sensors and DIT carts receive cleaner power than they would from a standard wall outlet.

Q: Why is a battery better than a silent diesel generator for sound recording?

A: Silent diesel generators still produce 55dB to 65dB of low-frequency hum. WEGREEN operates at under 45dB, which is virtually silent, allowing the Sound Mixer to capture clean tracks even with the power source hidden just behind a lighting stand.